BED, AC-POWERED ADJUSTABLE HOSPITAL
This device is manufactured by GYRUS ACMI, GYRUS MEDICAL, STRYKER CORPORATION, STRYKER MEDICAL-KALAMAZOO.
The following problems were reported about this device:
| Year | Description | Events/year | Type |
|---|---|---|---|
| 2024 | Sharp Edges | 1 | Device |
| 2024 | Positioning Failure | 1 | Device |
| 2024 | No Audible Alarm | 1 | Device |
| 2024 | Incorrect Measurement | 1 | Device |
| 2024 | Electrical /Electronic Property Problem | 1 | Device |
| 2024 | Device Fell | 1 | Device |
| 2023 | Fall | 1 | Patient |
| 2023 | Unintended System Motion | 1 | Device |
| 2023 | Sharp Edges | 1 | Device |
| 2023 | No Audible Alarm | 1 | Device |
| 2022 | Unintended System Motion | 1 | Device |
| 2022 | Sharp Edges | 6 | Device |
| 2022 | Positioning Failure | 1 | Device |
| 2022 | No Audible Alarm | 2 | Device |
| 2022 | Incorrect Measurement | 4 | Device |
| 2022 | Electrical /Electronic Property Problem | 6 | Device |
| 2022 | Device Fell | 4 | Device |
| 2019 | Use of Device Problem | 1 | Device |
| 2019 | Unintended System Motion | 1 | Device |
| 2019 | Sparking | 1 | Device |
| 2019 | Sharp Edges | 2 | Device |
| 2019 | No Audible Alarm | 2 | Device |
| 2019 | Melted | 1 | Device |
| 2019 | Mechanical Problem | 1 | Device |
| 2019 | Material Split, Cut or Torn | 1 | Device |
| 2019 | Loose or Intermittent Connection | 1 | Device |
| 2019 | Incorrect Measurement | 2 | Device |
| 2019 | Improper or Incorrect Procedure or Method | 1 | Device |
| 2019 | Failure to Sense | 1 | Device |
| 2019 | Electrical /Electronic Property Problem | 2 | Device |
| 2019 | Device Fell | 3 | Device |
| 2019 | Defective Alarm | 1 | Device |
| 2019 | Application Program Problem: Dose Calculation Error | 1 | Device |
| 2018 | Unintended System Motion | 3 | Device |
| 2018 | Unintended Movement | 1 | Device |
| 2018 | Sharp Edges | 1 | Device |
| 2018 | No Audible Alarm | 4 | Device |
| 2018 | Mechanical Problem | 1 | Device |
| 2018 | Insufficient Information | 2 | Device |
| 2018 | Incorrect Measurement | 5 | Device |
| 2018 | Failure to Sense | 1 | Device |
| 2018 | Electrical /Electronic Property Problem | 5 | Device |
| 2018 | Device Fell | 4 | Device |
| 2018 | Device Alarm System | 2 | Device |
| 2018 | Alarm Not Visible | 1 | Device |
| 2018 | Adverse Event Without Identified Device or Use Problem | 1 | Device |
| 2017 | Use of Device Problem | 3 | Device |
| 2017 | Unintended System Motion | 1 | Device |
| 2017 | Unintended Movement | 3 | Device |
| 2017 | Peeled/Delaminated | 2 | Device |
| 2017 | No Audible Alarm | 1 | Device |
| 2017 | Mechanical Problem | 1 | Device |
| 2017 | Incorrect Measurement | 5 | Device |
| 2017 | Improper or Incorrect Procedure or Method | 1 | Device |
| 2017 | Electrical /Electronic Property Problem | 1 | Device |
| 2017 | Device Alarm System | 1 | Device |
| 2017 | Collapse | 1 | Device |
| 2016 | Device Alarm System | 1 | Device |
| 2015 | Device Alarm System | 1 | Device |
| 2014 | Use of Incorrect Control/Treatment Settings | 1 | Device |
| 2014 | Unintended System Motion | 5 | Device |
| 2014 | Sticking | 15 | Device |
| 2014 | Sparking | 1 | Device |
| 2014 | Scratched Material | 1 | Device |
| 2014 | Power Problem | 1 | Device |
| 2014 | Positioning Problem | 2 | Device |
| 2014 | Overheating of Device | 1 | Device |
| 2014 | Mechanical Problem | 2 | Device |
| 2014 | Material Twisted/Bent | 1 | Device |
| 2014 | Material Integrity Problem | 3 | Device |
| 2014 | Malposition of Device | 2 | Device |
| 2014 | Loss of Power | 8 | Device |
| 2014 | Improper or Incorrect Procedure or Method | 3 | Device |
| 2014 | Improper Device Output | 2 | Device |
| 2014 | False Reading From Device Non-Compliance | 1 | Device |
| 2014 | Failure to Power Up | 17 | Device |
| 2014 | Failure To Run On AC/DC | 1 | Device |
| 2014 | Electrical /Electronic Property Problem | 2 | Device |
| 2014 | Device Slipped | 3 | Device |
| 2014 | Device Operates Differently Than Expected | 8 | Device |
| 2014 | Device Inoperable | 21 | Device |
| 2014 | Device Displays Incorrect Message | 1 | Device |
| 2014 | Device Contamination with Chemical or Other Material | 1 | Device |
| 2014 | Device Alarm System | 8 | Device |
| 2014 | Detachment Of Device Component | 1 | Device |
| 2014 | Connection Problem | 1 | Device |
| 2014 | Component Missing | 2 | Device |
| 2014 | Calibration Problem | 1 | Device |
| 2014 | Break | 39 | Device |
| 2014 | Bent | 1 | Device |
| 2013 | Use of Incorrect Control/Treatment Settings | 2 | Device |
| 2013 | Use of Device Problem | 1 | Device |
| 2013 | Unintended System Motion | 1 | Device |
| 2013 | Sticking | 10 | Device |
| 2013 | Improper or Incorrect Procedure or Method | 1 | Device |
| 2013 | Failure to Power Up | 1 | Device |
| 2013 | Electrical /Electronic Property Problem | 1 | Device |
| 2013 | Difficult To Position | 1 | Device |
| 2013 | Device Operates Differently Than Expected | 7 | Device |
| 2013 | Device Inoperable | 4 | Device |
| 2013 | Device Alarm System | 5 | Device |
| 2013 | Connection Problem | 1 | Device |
| 2013 | Calibration Problem | 1 | Device |
| 2013 | Break | 5 | Device |